Featured Membrane Touch Panels & Tactile Keypads
Direct manufacturing delivery to Mount Maunganui, Tauriko Industrial Park, and the wider Bay of Plenty region with complete quality traceability and rapid custom prototyping.
Waterproof & Dustproof Medical Control Panel
- IP67 / IP68 Hermetic Sealing
- Anti-Bacterial Autotex Film
Cross 4-Legged Snap Dome Poly Reel Dome Array
- High-Speed SMT Reel Packing
- Crisp Tactile Click Ratio >55%
Light Guide Film (LGF) Backlit Dome Keypad
- Uniform Surface Luminescence
- Low-Power SMT Micro-LEDs
Double-Sided SUS301 EMI Metal Dome Array
- Built-in EMI/RFI Shielding
- Gold/Nickel Plated Contacts
Embossed Tactile Graphic Control Overlay
- Selective UV Texturing & Gloss
- 3M 467MP/468MP High-Bond Glue
Flexible 4x4 Matrix Tactile Keypad
- Standard 2.54mm Pitch Connector
- 1,000,000+ Press Cycle Life
Ultra-Thin Flexible Silver Circuit Sensor
- Conductive Carbon Overprint
- Resists Trace Oxidation
Multi-Button Backlit Controller Membrane
- Clear Deadfront Annunciator Windows
- Direct OEM Replacement Ready
Engineered for Tauranga's Coastal & Agricultural Industrial Ecosystem
Why Bay of Plenty mechanical, automation, and electronics designers require specialized Human-Machine Interface (HMI) layer chemistry rather than generic off-the-shelf control components.
Port of Tauranga & Marine Handling
Serving the largest export port by volume in New Zealand, equipment at Mount Maunganui and Sulphur Point faces perpetual salt fog, high humidity, and aggressive airborne chloride ions. Our marine-grade touch panels use 3M 300LSE adhesive matrices and vulcanized perimeter gaskets that prevent moisture ingress, edge delamination, and silver trace dendrite migration under long-term marine weathering.
Post-Harvest Kiwifruit & Dairy Automation
Across the Te Puke and Tauriko corridors, optical sorters, packaging machines, and cold storage monitoring systems encounter intensive high-pressure hot water and peracetic acid sanitization washdowns. Cevra integrates continuous chemically inert Autotex XE UV-resistant polyester overlays that withstand repeated Clean-in-Place (CIP) chemical wiping without haze, cracking, or tactile snap failure.
High UV Sunlight Exposure in NZ
New Zealand's low atmospheric ozone concentration creates harsh peak UV conditions (UV Index 11+) that degrade unformulated polycarbonate within months. We engineer graphic front panels with stabilized outdoor-grade textured PET and UV-cured screen printing inks, guaranteeing zero yellowing, embrittlement, or visual degradation over 7+ years of continuous outdoor agricultural deployment.
Technical Layer Architecture & Material Selection Matrix
Evaluate trade-offs between tactile feedback, environmental IP ratings, and electrical performance to determine the optimal HMI topology for your device enclosure.
| Architecture Type | Tactile Response | Ingress Protection | Operating Temperature | Primary Bay of Plenty Use Case |
|---|---|---|---|---|
| Tactile Metal Dome on PET | Crisp mechanical snap (280g - 420g actuation) | IP65 to IP67 sealed overlay | -30°C to +80°C | Timber yard processing, material handling, conveyor controllers |
| Capacitive Sensor Film Switch | Zero mechanical motion; LED / audio feedback | IP68 hermetic flush front | -20°C to +75°C | Food washdown zones, medical instruments, cleanroom consoles |
| LGF Backlit Dome Panel | Solid tactile click with uniform illumination | IP65 splash & dust sealed | -25°C to +75°C | Night navigation marine controls, dimly lit automated packhouses |
| Double-Sided EMI Dome Array | Fast snap feedback directly to PCB pads | Enclosure dependent | -40°C to +85°C | High-frequency telemetry radios, agritech telemetry base stations |
| Embossed Non-Tactile Flat Switch | Soft membrane flex feel (< 150g actuation) | IP67 chemical-resistant | -20°C to +70°C | Low-frequency operator panels, cost-sensitive consumer appliances |
New Zealand B2B Trends Shaping HMI Procurement
Critical engineering considerations for New Zealand engineers importing membrane assemblies from direct overseas manufacturers.
AS/NZS & CE Electrical Safety
Membrane switches operating in low-voltage DC logic circuits must comply with insulation breakdown thresholds. Our silver circuits feature a minimum 100MΩ insulation resistance at 100V DC, backed by dielectric insulation layers that eliminate cross-talk and short circuits.
Direct Tauranga Sea & Air Logistics
Avoid expensive domestic transshipment bottlenecks in Auckland. Cevra coordinates airfreight direct to Auckland/Tauranga customs bonded facilities, and consolidated full-container loads via ocean freight arriving smoothly through Port of Tauranga wharves.
RoHS & REACH Compliance
New Zealand Environmental Protection Authority (EPA) regulations mandate toxic-free industrial scrap. All our raw materials—from conductive DuPont silver pastes to 3M acrylic adhesive liners—carry genuine RoHS, REACH, and Halogen-Free laboratory test certifications.
Shift Toward Hybrid Smart Panels
Kiwi hardware innovators are transitioning from bulky discrete push-buttons to integrated flush membrane panels incorporating cutouts for OLED touchscreens, embedded surface-mount LEDs, and capacitive proximity sensors into a single unified front bezel.
Dongguan Cevra Electronic Technology Co., Ltd.
Established in March 2009, Cevra operates a dedicated 2,600㎡ manufacturing plant equipped with dust-free screen printing workshops, CCD-guided precision punch presses, and automated assembly cells. Unlike trading intermediaries, we control every single layer of your switch stack-up.
- ISO 9001:2015 Certified & SGS Onsite Audited: Fully documented incoming raw material checks, in-process lamination QA, and outgoing serialization.
- Advanced Laboratory Rigor: In-house dome force-displacement curve testers, peel-adhesion tension gauges, pencil hardness scratch testers, and high/low temperature humidity chambers (-40°C to +120°C).
- Design For Manufacturability (DFM) Support: Experienced senior engineers reviewing trace pitch, venting channels, key embossing relief, and connector pinouts prior to tooling.
Frequently Asked Questions for Tauranga Buyers
Detailed engineering and commercial answers to help procurement managers and product designers streamline offshore HMI production.
How do you handle shipping and customs clearance into Tauranga?
We provide full export crating with moisture-barrier vacuum bags and desiccant packs. Shipments can be consigned directly via DAP/DDP air express (DHL/FedEx/UPS 3-5 days delivery to Tauranga addresses) or ocean freight containers through Port of Tauranga, complete with commercial invoices, HS codes, packing lists, and certificates of origin for New Zealand Customs processing.
What files are required to receive an engineering review and quotation?
Send your vector artwork (Adobe Illustrator .AI, PDF, CorelDraw) for graphic legends and colors (Pantone PMS or RAL numbers), alongside mechanical drawings (.DXF, .DWG, or 3D .STEP files) indicating layer thicknesses, tail lengths, connector pinout tables, and metal dome actuation force specifications.
How do you prevent silver trace migration in humid coastal environments?
In high-humidity marine zones like Mount Maunganui, electrical potential across silver traces can cause electrochemical dendrite growth. We eliminate this by applying a dense carbon overcoat protection layer over all conductive silver traces, utilizing high-insulation dielectric coatings, and designing hermetically sealed perimeter vents that equalize barometric pressure without drawing moisture inside.
Can we request pilot run prototypes before committing to mass production?
Yes. We support New Zealand startups and established OEMs with rapid prototyping batches (from 10 to 50 pieces) using laser die-cutting and digital printing techniques. This enables your mechanical and firmware engineers to validate tactile feel, connector mating, and enclosure tolerances prior to steel die tooling fabrication.
What adhesive system do you recommend for powder-coated aluminium cases?
Standard acrylic adhesives often lift off textured or low surface energy (LSE) powder-coated metal enclosures. For these applications, we utilize genuine 3M 300LSE or 3M 200MP laminating adhesives, providing up to 90 oz/in peel adhesion that holds permanently across wide temperature fluctuations.
Are your metal dome arrays compatible with pick-and-place automated assembly?
Yes, we supply custom cross 4-legged, round, and triangular snap domes in tape-and-reel packaging compatible with standard SMT pick-and-place feeders, or as pre-assembled peel-and-stick dome array sheets featuring customized alignment holes for rapid manual installation on rigid FR4 PCBs.
Ready to Build Custom Membrane Panels for Your Tauranga Application?
Connect directly with our senior application engineers. We provide comprehensive DFM evaluations, layer stack-up diagrams, sample swatches, and factory-direct pricing within 24 hours.
Contact Us